If you’re building, renovating, or just ready for a change in lighting, there’s nothing worse than spending hours researching and choosing a light fixture, only to get it home and find out that a measurement got missed somewhere along the way and it won’t work the way you wanted.

Before you buy, read and bookmark this article for quick reference. When you’re armed with the best information, you’ll make the best choices. 

And remember, the very best way to get your information right from the get-go is to ask a lighting expert – so don’t skip the trip to your local lighting showroom! They’ll be able to help you avoid any common mistakes and help you get what you want right from the start.

Understanding Light Output

You’ll want to get familiar with a couple of vocab words before jumping in. 

• Watts: The amount of energy or electricity a bulb uses. Has nothing to do with brightness.
• Foot Candles: The amount of perceivable light from a fixture at one foot away.
• Lumens: The amount of overall light given off by a light source. Has nothing to do with power consumption.

How These Terms Relate To Each Other

Comparing a fixture or bulb’s wattage and lumens will show its efficiency. A bulb with low wattage and high lumens uses less power to generate more light, meaning it will cost less to light your home. 

Not all rooms are created equal – bedrooms generally need less light than a kitchen. To determine how many lumens you need, multiply the square footage of the space by the foot candle recommendation. For example, a typical 300 sqft bedroom will need around 3000-6000 lumens in total. [Sqft of room x min and max foot candles = Total min and max lumens needed]

This total includes all types of light in the room, from ceiling fixtures to lamps to sunlight. For best results, you never want to have all of the light in a room come from a single source. A great lighting plan considers the times of day the room will be used, accent lighting like reading lamps, and activities that happen in the room. If your room can transition perfectly from busy daytime work to a relaxed evening at home, then you’ve nailed it.   

 

Universal Standard Measurements

While most fixtures have their own set of standard measurements for placement and sizing, there are a handful of things that are universal. For brevity’s sake, we’ve put those things here rather than repeating them for each fixture. 

• Height and Head Clearance: Keep at least 7’ of clearance between the bottom of the fixture and the floor. If there is any chance that a hanging fixture could be in the way, especially in places like hallways and stairs, raise the fixture a bit more to avoid accidents. Vaulted or high ceilings may need more clearance between the fixture and the floor to look balanced. Lower fixtures will make a room feel more intimate, while higher fixtures are less noticeable (which is sometimes the goal).
• Door Clearance: If you’re installing a fixture near a door, keep 6” of clearance between the bottom of the fixture and the top of the door.
• Weight Limit: Modern standard ceiling light boxes are manufactured to hold up to 50 pounds when installed correctly. It’s important to check the weight of your fixture and the structure of your ceiling before installing any ceiling fan or a fixture over 35 pounds. Installing the extra support doesn’t usually cost much – and it’s way cheaper than paying for damages if an improperly supported fixture falls.
• Dining Table: The max width of a light fixture over a dining table should be around 1/2-3/4 the width of the table. The bottom of the fixture should be just above your seated eye level so that it doesn’t obstruct the view – usually about 30-36” from the table surface. Always center the fixture over the table, not in the center of the room. [table width x ½ and ¾ = min and max fixture width]
• Great Rooms and Multi-Purpose Rooms: You’ll want to consider all angles when choosing fixtures for rooms with multiple uses. For example, many great rooms have a dining room between the kitchen and living room. You’ll still want to follow standard dining fixture recommendations to start – but you’ll also need to hang your fixture high enough to avoid glare and an obstructed view while standing and using the rest of the space.

Standard Measurements by Fixture

Standard measurements will work well in almost every home, but there’s always room to bend the rules a little for a fixture you love or in a unique space. For rooms or areas not mentioned, refer to the general standards and/or rooms with similar uses.

FLUSH AND SEMI-FLUSH LIGHTS

• General Sizing: Add the length and width of the room in feet together, then record that number in inches to determine the best width for a ceiling fixture. For example, a 10’x20’ living room can accommodate a 30” wide ceiling fixture. (This formula works well for most ceiling-mounted lights, not including fixtures like ceiling fans and recessed lights.) [room length in feet + room width in feet = optimal ambient fixture width in inches (no conversion, just change the units)]
• General Placement: Flush and semi-flush lights are generally installed in the center of a room, or over the center of a specific-use area like a dining table. Flush mounts work best in rooms with standard ceiling heights at 8’, and may feel dim if installed on a tall ceiling. Semi-flush lights hang down from the ceiling, and work great in rooms with 9-10’ ceilings. 
• Bathroom: It’s best to maintain 8’ between the top of the bathtub and the bottom of a fixture. Flush mounts are a great choice for ambient lighting in a bathroom, but they don’t work well as the only light in a bathroom, as they can create shadows on the face. For best use in the bathroom, combine your ceiling fixture with a pendant or sconce near the mirror.

PENDANTS 

• General Sizing: For single pendants, the same room length in feet + room width in feet = fixture width in inches formula from above works well. For grouped pendants, sizing depends largely on personal preference and the available space for installation. 
• General Spacing: When hanging multiple pendants, the minimum spacing between them should be about 18”. For larger pendants, the recommended minimum spacing is equal to the diameter of the pendants. For example, 20” wide pendants should be hung at a minimum of 20” apart.
• Kitchen Island: There are many ways to hang pendants over an island, and there isn’t one hard-and-fast set of rules. Here are a few guidelines to consider:
  • For islands up to 6’ wide, the max is usually two pendants, but you can sometimes get away with three small pendants if you prefer that look. For islands over 6’ wide, many homeowners choose to use three or more pendants to maximize light coverage across the countertop.
  • To determine how far away from the edge of the island pendants should be, divide the diameter of the pendant in half. For example, the side of 18” pendants should be a minimum of  9” away from the edge of the island. [pendant width / 2 = recommended distance from pendant to edge of island]
  • A large, single pendant should not exceed 2/3 of the island’s width. For example, the widest you’d want to go on a pendant over a 6’ island is about 48”. [total island width x ⅔ = max pendant width]
• Sinks and Counters: The standard distance from the counter for a pendant is 30-40” but 36” and above is best. When using pendants for task lighting, choose a fixture that allows the light to shine in the right place – a pendant with a solid bottom won’t light a counter very well.
• Bedroom: As a reading light above a bedside table, aim for the lighted portion of the pendant to be about 55-60” above the floor or 30-36” above the mattress. 

CHANDELIERS

• General Sizing: To determine the ideal diameter, add the length and width of your room together in inches. For example, a 15×20 room would need a chandelier approximately 35” in diameter (15+20=35). To determine the ideal height of the fixture, plan on around 2-3” of height for each foot of ceiling height. For example, in a home with 8’ ceilings, a chandelier should be about 16-24” tall (8×2=16, 8×3=24). A two-story foyer in that home can easily support a chandelier that’s 32-48” tall (16×2=32, 16×3=48). [room length in feet + room width in feet = optimal chandelier width in inches (no conversion, just change the units)], [ceiling height in feet x 2 and 3 = min and max chandelier height]
• General Placement: Chandeliers are a bold design choice intended to stand out and make a statement. They’re almost always placed in the center of a room, or centered over a part of a room with a specific use, like a dining table or a clawfoot bathtub.
• Dining Table: In a room with 8’ ceilings, the standard height is about 30-36” above the table, then add 3” for every foot over 8’ in ceiling height. Always center the chandelier over the table, not in the center of the room.
• Two-story foyer: Keep the bottom of the chandelier above the height of the first floor.

SCONCES

• General Sizing: When it comes to sizing and scale, there isn’t a great universal formula here – it’s left largely up to personal preference and a good eye. A good rule of thumb for sconces is this: The closer you’ll be standing to look at whatever the sconce is lighting, the smaller the sconce should be. 
• General Placement: Sconces are usually placed around eye level, around 60-72” from the floor. In rooms with higher ceilings, 66-72” will feel more balanced. Take into consideration the style of the fixture – a sconce with a bare bulb will feel more comfortable a bit above eye level, whereas a sconce with a shade will feel more comfortable if the shade is at eye level to avoid catching the glare of the bulb from under or above the shade.
• Dining Room: Because people will be seated for the majority of the time, sconces should be hung slightly lower in the dining room – closer to 60” from the floor.
• Bathroom: Sconces work best placed on either side of the mirror at eye level, around 4-12” away from the edges depending on the look you’re after and where the electrical boxes can be installed. Sconces can also be centered above the mirror at just above eye level, usually between 60-70” off the floor. 
• Bedroom: As a reading light above a bedside table, aim for about 55-60” above the floor or 30-36” above the mattress. 
• Porch, Patio, Doors: When choosing a sconce to go near an exterior door, look for one that is 1/4 – 1/3 of the height of the door. For example, the most common standard door height is 80”. To determine the best sconce size, 80” ÷ 4 = 20” and 80” ÷ 3 = 26.6’ tell us to look for a sconce that is around 20-26” tall. Generally speaking, outdoor sconces should be positioned at around 66-72” above the ground at the center of the light. You can fudge the high end a little for extra tall spaces, but going above 72” isn’t usually recommended. [height of exterior door x ¼ and ⅓ = min and max of sconce]
• Garage: The best practice is to put a sconce on either side of every garage door, with the bottom of the fixture around 1’ from the top of the garage door. With this configuration, opt for fixtures that are 1/4 – 1/3 of the height of the door. For example, an 8’ garage door will look best with sconces that are 24”-32” (96” ÷ 4 = 24” and 96” ÷ 3 = 32”). When hanging lights centered over the garage doors instead, be sure that the fixtures are large enough to light the full width of the driveway. [height of garage door x ¼ and ⅓ = min and max of sconce]

RECESSED LIGHTS

• General Sizing: Standard recessed lighting is typically 4-6” wide. 6” lights are the most common and are most often used for general lighting. 4” and 5” lights are often used for task or accent lighting, such as providing extra light over a kitchen counter. 
• General Placement for Ambient Lighting: The number of lights you’ll need will vary greatly depending on the size and brightness of the lights, the size of the room, and the height of the ceiling. The formulas below will get you a good rough estimate, but it’s usually a good idea to stop in at a lighting showroom and check in with an expert when planning a recessed light layout. There are a lot of things to consider, and recessed lighting is difficult to move after the fact if you run into an issue. 
  • Amount – A good place to start is to multiply the room’s square footage by the recommended foot candles to calculate the total lumens you’ll need. Then, divide the total lumens by the lumen output of the recessed lights you want to use. For example, for a 300 sqft bedroom, requiring 10-20 foot candles, using 370-lumen lights, you’ll want to stick to around 8-16 lights (300 x 10 ÷ 370 = 8.1) and (300 x 20 ÷ 370 = 16.2). [room sqft x min and max foot candles = total lumens min and max], [total lumens min and max / one light’s lumen output = min and max number of lights needed]
  • Spacing – It’s always best to follow the manufacturer’s recommendation, but a good rule of thumb for planning is to divide the ceiling height in half to determine how far apart the lights should be. Divide that number in half again to determine how far away from the wall the lights should be. For example, in a room with 8’ ceilings, space your lights about 4’ apart and 2’ from the wall. [ceiling height / 2 = distance between lights, distance between lights / 2 = distance from wall]
  • Zoning – If you have a room that serves multiple purposes (like a great room or a living room with a home office nook), measure and map out each area separately when planning your overall layout.
  • Existing fixtures – It’s very common for a room to have a grid of recessed lights in addition to a statement fixture like a chandelier or a ceiling fan. You’ll want to plan around the fixture location and take its light into account.
  • Furniture – A bright recessed light directly above a couch can feel uncomfortable and create shadows. In these situations, try to place lights around the perimeter and in the middle of the room to help with glare.
  • Dimmer switch – Sometimes a grid of overhead recessed lights can feel a little harsh. We always recommend installing a dimmer switch for your lights so that you can always feel comfortable in your space.
• General Placement for Task or Accent Lighting: Recessed lights are also used for supplemental lighting in places where that need a bit more light, like over a kitchen counter, a piano, a reading nook, etc. Place these accent lights based on where you need the light, but choose carefully – you want your task lighting to shine on your task rather than on your head or in your eyes. Some recessed lights can be angled, which makes getting the light in just the right spot a bit easier.

CEILING FANS

• General Sizing: Ceiling fan sizes are measured by the diameter of the blades, or the blade span. The size fan you need is determined by the size of the space it needs to cool. An undersized fan will feel weak and underwhelming, but a fan that’s too large can turn a room into a wind tunnel. Size recommendations can vary a little depending on the manufacturer, but this chart will give you a general idea of what size fan you’ll need:

• General Placement: For 8’ ceilings and lower, you’ll need a flush mount or hugger fan that attaches directly to the ceiling to keep the required 7’ minimum clearance to the floor. You also need at least 8” of clearance between the blades and the ceiling for optimal airflow. For ceilings over 8’, look for a ceiling fan with a downrod, which will drop the fan away from the ceiling. Aim to have your ceiling fan around 8-9’ above the floor for the best airflow.
• Airflow Efficiency and CFM: Cubic Feet per Minute refers to the amount of air moved per cubic foot that a ceiling fan can move in one minute at its highest setting. The higher the CFM, the more air a fan moves. To determine the efficiency of a fan, divide a fan’s CFM by the Watts. An efficiency score of 75 is the minimum requirement to label a fan as energy efficient. [CFM / Watts = Airflow Efficiency]

TABLE LAMPS

• General Sizing: Measure the height of the furniture the lamp will be on. Aim for a lamp that’s around ⅔ the height of the furniture, and avoid going above 1.5 times the height. (You may want to go smaller for lamps placed on taller furniture to avoid glare.) The widest part of the lamp and shade should be smaller than the width of the furniture. [best standard lamp height = table height x ⅔]
• General Placement: Best practice with table lamps states that the lamp should be at about eye level when you’re near it. For lamps near couches and chairs, that’s typically around 58-64”. Whether you spend most of your time sitting or standing in a room, the bottom of the shade should be around eye level to avoid accidental glare above or below the shade.

———————-

Don’t get stuck in the muck – if you’re planning a lighting project, save the stress and stop by our showroom. All we do is lighting – and we do it right. You’ll get free expert advice and access to thousands of fixtures – and customer service that you just can’t beat at a big-box store or shopping online. Skip the headache, and stop on by. We’ll see you soon!

If you’ve ever shopped for ceiling fans, more than likely you’ve run across a new few terms and acronyms. Don’t fall into the trap of ignoring the specs and shopping for looks alone – CFM is an important term to understand before you decide on your next ceiling fan.

What is CFM?

CFM stands for Cubic Feet per Minute, which is a measurement that tells you how many cubic feed or air pass by a point in one minute. For ceiling fans, the CFM will tell you how much air a fan can move, or how “windy” it will feel at its highest speed. You’ll also see CFM referred to as “Max Airflow”.

There are a few things that can impact a fan’s CFM, including the motor and the number, pitch (or angle), and length of the fan’s blades. The most important thing to remember is that the higher the CFM, the more air the fan will move.

How much CFM do I need?

Generally speaking, a ceiling fan with a CFM over 4,000 should be enough for your needs, but a CFM over 6,000 is better. Some brands call fans with a CFM over 7,000 high airflow and over 9,000 CFM extreme airflow. 

This gets more complicated when you take into account the size of the room and the height of the ceiling. A small bedroom with 8 foot ceilings will be fine with a fan with lower CFM, and a large great room with vaulted ceilings will need to have a fan with much higher CFM in order to move enough air to feel it throughout the space. 

Because fan and motor designs vary by the fan and the brand, the best way to know for sure if you’re getting a ceiling fan that will work well for your room is to check the manufacturer’s recommendations for room size. 

CFM and Energy Efficiency

CFM is a useful measurement on its own, but it’s also a the key ingredient for figuring out how efficient your ceiling fan is. If you don’t pay attention to efficiency, you could accidentally end up with a fan that uses a lot of energy, costing you more money to use than you realised until it’s too late. An energy efficient fan will move more air using less energy, meaning you can keep your room cool without an unexpected spike in your power bill. 

To determine the efficiency of a fan you have to do a little bit of math. Airflow efficiency is CFM divided by the watts (or energy) used to power the fan at its highest speed. For example, a ceiling fan with 4,000 CFM that uses 80 watts will have an airflow efficiency score of 50 (4,000 / 80 = 50). 

Generally speaking, a ceiling fan with an airflow efficiency of 75 is considered efficient, but this can vary depending on the size of the fan. One of the easiest ways for consumers to tell if a fan will be energy efficient is to look for the Energy Star logo on the packaging. Any ceiling fan with an Energy Star endorsement will be much more efficient than conventional fans, which will save you money in the long run.

To see a breakdown of how Energy Star uses fan size and CFM to determine whether or not a fan is eligible for an Energy Star rating, check out these graphs. If energy efficiency is a goal for your ceiling fan search, you can also browse ceiling fans on our website, and filter by Energy Star to see only fans with an Energy Star certification. 

 

In short, CFM is a measurement that tells you how much air a fan moves at its highest speed. How much CFM you need from a fan depends a lot on the room its in – the overall size, the usage, the ceiling height, etc. While CFM isn’t the only statistic on the box that matters when shopping for a fan, it’s definitely an important number to consider – especially how it relates to energy efficiency and the amount of money you’ll spend using your fan over the years. Need help finding a ceiling fan? Our lighting experts can help you find exactly what you need at Galleria Lighting.

 

In the world of interior design, open floor plans have become the standard of modern living. Open plans blend living, dining, and kitchen areas into a (hopefully) seamless and cohesive space that provides many options for functionality and creativity. The airiness in an open plan creates an atmosphere that’s hard to beat. But it’s this same openness that creates a unique set of challenges when it comes to lighting. 

How do you ensure every nook and cranny is well-lit? How do you ensure that your lighting choices work well with each other and provide a sense of harmony and balance? Lighting an open floor plan requires a bit of planning, but it’s very doable. 

What are some of the challenges with lighting an open floor plan?

• Multiple Functions, One Space: Open floor plans often combine living, dining, kitchen, and occasionally other work areas. Each of these spaces requires different lighting levels and types. For example, a kitchen island may require task lighting, while the living area needs ambient and accent lighting.
• Limited Wall Space: In a traditional room, you can usually rely on wall-mounted fixtures or strategically placed lamps for ambient lighting. Open floor plans have fewer walls, which can limit the location options for fixtures that evenly distribute light.
• Balancing Aesthetics and Functionality: Because all areas are connected, the fixtures you choose will be visible from everywhere. It’s important to choose light fixtures that can be both beautiful and provide the amount of light needed for the tasks and activities taking place in each area of the space.
• Maintaining Visual Harmony: With an open layout, it’s important that the lighting fixtures and decor flow seamlessly from one area to another. This can be a challenge if there are significant style or design differences between spaces. This can also make placing drop-down fixtures such as pendants or chandeliers tricky – they might light the table perfectly, but block sight or conversation lines between other areas in the space.

So, how do we tackle these challenges? Follow these 5 steps for beautiful and balanced open floor plan lighting:

 

1. Think About Scale and Proportion

When it comes to lighting, size and scale matter. Massive chandeliers or pendant lights might be eye-catching, but they can overpower the room and disrupt the balance and flow of a space. Likewise, fixtures that are too small and underwhelming can be lost in the visual depth of an open floor plan.  

A fixture’s scale (size in relation to the space it occupies as well as other design elements) should align with its intended purpose. For example, a fixture used for task lighting should illuminate it’s specific work areas without too much overlap, and a ceiling fixture used for ambient lighting should provide consistent overall coverage without overpowering or underwhelming the room. 

 

2. Layer Your Lighting for Depth and Drama

Just like a painting, a well-lit space has layers. Think like an artist and use these layers to achieve lighting perfection. Here’s how you can do it:

• Ambient Lighting: This is your base, providing overall illumination. Consider recessed lights or track lighting for even coverage.
• Task Lighting: This is focused light for specific activities like reading, cooking, or working. Think pendant lights over an island or desk lamps.
• Accent Lighting: Add drama and highlight architectural features, artwork, or plants. Use wall sconces, spotlights, or strip lights.

 

3. Create Zones with Different Fixtures

Since open floor plans combine multiple functions in one space, it’s crucial to define different areas with lighting:

• Living Area: Use a combination of floor lamps, table lamps, and overhead fixtures to create a cozy ambiance.
• Dining Area: A pendant light or chandelier hung low over the dining table sets the mood for intimate gatherings. Depending on the layout, wall sconces are also a great option.
• Kitchen: Under-cabinet lighting brightens up workspaces, while pendant lights over an island provide functional and decorative illumination.

 

4. Play with Temperature

The color temperature of your bulbs can significantly impact the mood of your space. It’s okay to mix and match light colors throughout, but avoid large differences in ambient color temperature in adjoining spaces.

• Warm White (2700K-3000K): Creates a cozy, inviting atmosphere, perfect for living and dining areas.
• Cool White (3500K-4100K): Provides bright, energizing light suitable for kitchens and workspaces.
• Daylight (5000K+): Mimics natural daylight and works well in task-oriented areas.

 

5. Embrace Natural Light

In any rooms that have windows, you always want to consider the natural light that comes through them as a part of your lighting plan. A good lighting plan doesn’t just consider how the space will look in the evenings – you’ll also want to strategically place fixtures to complement, rather than compete with, natural light. Watch your room throughout the day, and throughout the seasons. You’ll notice places where the natural light might need a little extra help.

When you can harmonize your light fixtures with the changing natural light, you’ll end up with a space that feels just right from dawn to dusk. Planning your lighting around natural is big deal, but it’s not the only way to take advantage of the free light streaming through your windows.  Here are a few more tips for striking a harmonious balance with the natural and artificial lighting in your open floor plan:

• Window Treatments: To let in more light without sacrificing privacy, look for light, airy curtains to use during the day. Don’t forget – sheer curtains aren’t great for privacy when it’s dark outside, so they work best in conjunction with a layer of blackout curtains or a set of blinds. If curtains aren’t your thing – opt for light-colored blinds that can be angled to allow natural light to flow freely. 
• Mirrors and Reflective Surfaces: Strategically placing mirrors opposite windows can help bounce light around the room, making it feel even brighter and more spacious. You can get a similar result with furniture or art pieces with reflective surfaces – so feel free to mix and match to get the right look.
• Install Dimmer Switches: Dimmer switches allow you to adjust the intensity of artificial light to complement changing natural light conditions. It’s a great solution for those cloudy days when the sunlight isn’t *quite* enough – you can add just a *bit* of light to comfortably see what you need to do without having to blast a full set of ceiling lights in the middle of the day. 

————

Remember, lighting is the heartbeat of any space, and in an open floor plan, it is an especially powerful element that can transform and define the space. If you find yourself needing personalized guidance or are seeking that perfect lighting fixture, don’t hesitate to reach out to a lighting design expert. Their expertise can make all the difference in creating a space that not only looks amazing but also feels amazing!

 

“What is the good of your stars and trees, your sunrise and the wind, if they do not enter into our daily lives?” –E.M. Forster

Imagine stepping into a home that feels like a sanctuary, where every corner echoes the beauty of the world outside. That’s the magic of organic modern design. It’s a canvas that celebrates the elegant simplicity found in nature, weaving it seamlessly into our personal spaces.

What is Organic Modern Design?

This nature-inspired design trend has been growing in recent years and is all over social media and in interior design publications – and for good reason! Organic modern design is an interior design style that harmoniously blends contemporary aesthetics with elements of the natural world. It emphasizes clean lines, uncluttered spaces, and an abundance of natural light. 

This design style celebrates the relationship between humans and the natural world, incorporating organic shapes, textures, and colors into modern, clean-lined living spaces. The goal is a warm, inviting space that creates a sense of tranquility, balance, and a connection to nature.

After the rollercoaster of the past few years, many of us are craving a deeper connection to nature and the outdoors, and the enduring popularity of the organic modern design philosophy is here to deliver. So, if you’re ready to pay homage to Mother Nature in your space in the coming year, take some inspiration from the gorgeous, earthy interiors below!

 

This boho-inspired bedroom leans into the organic modern trend with great use of warm tones and natural accessories; including a rattan pendant light hanging over a bed of simple cotton textiles, a textural jute rug, a display of dried grasses, and simple wooden roman shades. The decor pieces elevate this otherwise rather minimalist space.

 

An excellent way to bring an earthy texture and feel into your home is with fixtures and decor pieces made with natural materials – such as these pendant light fixtures made from woven rattan. Other materials to consider include bamboo, wicker, jute, seagrass, limestone, clay, cork, cotton, wool, and leather. 

 

This space seems simple but makes wonderful use of organic, flowing shapes and a subtle punch of color. The sage green wall color and credenza pair well with the soft off-white chair, abstract artwork, and clay vases. Changing up your paint or displaying a few thoughtfully selected decor pieces is an easy way to breathe life into a room.

 

This living room features a neutral, yet well-balanced color palette – commonly seen in organic design.  The layering of clean-lined furniture, lush green potted plants, and minimalist decor pieces keep the space airy and welcoming. 

 

Bathrooms are a great place to start your journey into the organic modern design movement. This bathroom retreat is characterized by a seamless blend of neutral-tones and wood textures. A freestanding bathtub sits beside rustic wood shutters, inviting in the lush plant life outside. A floating vanity keeps the lines in the space clean while leafy potted plants infuse the space with a calming, spa-like ambiance.

 

White they are a staple of organic design, you don’t have to make live house plants the focus of your space if it’s just not your vibe or if you don’t have the space (or the green thumb). You can still bring a little bit of the outdoors in with a few small, well-placed plants adorning your space – such as those seen on these raw wood bookshelves. 

 

Since we’re on the topic of plants and greenery, we can’t forget to talk about the drama that is a plant wall! Plant walls and vertical gardens are a unique way to honor nature and truly blur the lines between indoors and outdoors. The rest of the pieces in this chic space are neutral enough to keep the focus on the wall while still being eye-catching in their own right.

 

In this organic-inspired kitchen, natural wood-grained cabinetry, stone countertops, and carefully curated decor take center stage. The open wood shelving, wide plank wood floors, and wooden beam add a touch of rustic, artisanal charm.

 

Natural light should be emphasized whenever possible in organic modern design. Capitalize on the natural light streaming into your home and create an oasis in your bedroom sanctuary. Balancing out bold plant life with subdued, natural-toned bedding creates a harmonious look and feel.

Pro Tip: Maximizing the use of daylight not only reduces reliance on artificial lighting but also improves mood, productivity, and overall health. Consider the strategic placement of windows, skylights, and glass doors to flood your space with sunlight. 

 

Furniture and fixtures made from natural elements set organic modern interiors apart from other design styles. This beautiful, rustic driftwood light fixture with warm Edison bulbs in varying shapes is simply stunning and unlike anything you’ve likely seen before. For help finding your own unique, nature-inspired light fixtures, check out Galleria Lighting! 

 

This bohemian-chic bedroom almost feels like a spa! A folding bamboo screen, simple wood bench, dried pampas grass, wicker lanterns, a wood basket, and earth-toned textiles bring warm, organic charm to the space. 

 

Color reigns supreme in this golden, earth-toned living room. Using nature-inspired artwork is an easy way to add a bit of the organic design trend to your own home. Also, how charming is that mushroom-shaped side table/ottoman?

 

The last few inspiration photos featured a lot of earthy accessories. You can embrace nature more simply, however, by showcasing your home’s architectural features and location. If you have amazing windows with a gorgeous view of the lush outdoors and ample natural light – like this swoon-worthy home – that’s all you need! Sometimes less truly is more. 

 

Gorgeous is an understatement when it comes to this expansive living room! Nature and organic elements can be emphasized through more than houseplants and decor alone. This space features breathtaking views through the floor-to-ceiling windows, an expansive natural stone fireplace, and beautiful warm wood flooring and bookcases. Don’t you just want to curl up here to soak in the snowy view, a warm cup of tea, and a good book?

 

As we move forward in a world seeking balance and harmony, organic modern design stands at the forefront of interior design trends. It’s a testament to our connection to nature, a reminder that our well-being is intertwined with the environment around us. Infuse your home with the beauty and energy of the outdoors. Let it be a place of solace, a sanctuary that replenishes your spirit, and a canvas that celebrates the wonders of the natural world.

———–

Ready to transform your space? Contact us today for a personalized consultation and let’s bring nature’s beauty into your home!