Styles & Trends

Before and After: 10 Stunning Bathroom Remodels That Will Inspire You

by admin · Mar 9, 2023

Whether you’re anticipating an upcoming bathroom remodel or simply brainstorming for a future day, this collection of bathroom remodels is sure to inspire! Below you’ll find bathrooms of all sizes, styles, and layouts. Some undergo a professional transformation while others are budget-friendly and DIY. Let the remodels begin!

1. Green to Pristine

This bathroom remodel cost under $100 dollars! This basement bathroom feels like new, thanks to some fresh paint, a plank wall, a quaint wire light fixture, and some homemade décor. Find more pictures of the project and how-to advice here.

2. Less Wall, More Light

These designers transformed a dingy bathroom by knocking down the wall between the toilet and vanity. The extra space lends itself to a well-lit, airy bathroom with a unique hanging globe, golden accents, and a clean wooden vanity.

3. Rethink the Pink

This too-pink tile was dated and dysfunctional– so a fresh remodel brings clean, white tile all the way up to the ceiling. Blue accents and a boxy bar light add some additional style to a totally new space! Check out how the homeowner’s daughter inserted some designs of her own in the process.

4. Wallpaper Power

Anything would have been an improvement in this unfinished space, but this homeowner went all out with a stylish vanity, bright patterned wallpaper, and two eye-catching sconces flanking the mirror. We love the bold look!

5. Chandelier and Atmosphere

In this professional makeover, an average bathroom becomes a something totally new. Raised double sinks and framed mirrors add functionality and flair, and the chandelier compliments the luxurious walk-in shower for an atmosphere of glamour.

6. Bland Whites to Bold Blues

This DIYer was bored with an all-white bathroom and found a solution in this navy, hexagon tile floor. The new black and white vanity basks in light from stainless-steel sconces, and the greenery balances and freshens the space.

7. Minimize to Maximize

With little available space and a little too much teal, this small bathroom felt cramped and outdated. Minimizing the vanity and eliminating the old cabinet storage created some much-needed space. A light coat of paint does wonders here with some modern sconces, adding much-needed light to the bathroom.

8. Eye-Popping Fixtures

This handy couple used a stunning black over-the-mirror fixture, along with a black curtain rod, to add a lovely sense of contrast in this bright, airy space. Décor and storage make all the difference here with wire baskets and floating shelves.

9. Wall Textures for the Win

These DIYers transformed their space by accenting their vanity and mirror with custom board and battens. The wall texture is incredibly refreshing, especially juxtaposed with bright towels and a dark, moody paint on the upper half of the wall.

10. Clean and Crisp

This walk through bathroom began with blaring floral wallpaper and insufficient light. A few budget-friendly fixes like painted walls, a repainted vanity and some updated décor transformed it into a very comfortable space.

Feeling inspired? We are! With a little planning and a lot of work, the perfect bathroom is always within reach. For questions about a new fixture or even how to pick a paint color that makes a room feel bright, call us at Galleria Lighting. We love to make your projects easier!

Nature-Inspired Lighting for Indoor Spaces

by admin · Mar 9, 2023

Eco-friendly. Plant-inspired. Natural colors. These well-loved decor trends are giving homes across the world a breath of fresh air by inviting the outside in.

Whether you take care of an army of plant babies or, if your green thumb skipped a generation, you prefer to use nature-inspired shapes, colors, and materials in your design, you’re sure to get some ideas from these beautiful nature-inspired interiors!

Use Your Houseplants

What better way to make your space feel alive than bringing in something that’s actually alive? If you’re willing to get creative, your indoor lighting and your house plants can work together in tandem to make a design statement that will literally bring life to your space.

These minimalist bulb lights illuminate plant displays while blending in with the scenery. These industrial lights feel elegant and natural hanging alongside leafy plants and mini terrariums.

Hanging lights can be combined with natural light from outside as well. This beautiful, open space is accented with simple hanging bulbs. The bulb pendants are long enough to reach eye level, but the cords blend nicely with other lines in the room.

These industrial-feeling pendants show a creative adaptation of a plant and light combination. Vines hanging from the ceiling are an unexpected accent to a warehouse-style ceiling. The vintage pendant lamps tie everything together.

You don’t have to have a lot of surface area to add life to your space. This light fixture doubles as a plant stand, creating a natural, rustic, multi-purpose conversation starter.

Find Nature-Inspired Lights

If the thought of keeping a bunch of house plants alive gives you hives, not to worry! Instead of tucking your lights amongst your plants, find light fixtures that echo the shapes and textures of the natural world. They’ll give you a great conversation piece and require zero watering.

Here’s a natural take on a pendant light. A string of white bulb lights wrapped around a tree branch adds a little fairy magic to a simple, gray room. It’s suspended from a cable in the ceiling to create a “floating” effect.

This chandelier is a modern take on the tree-branch concept. The multi-directional placement of the bulbs, along with its earthy copper color tones, gives off natural, modern vibes.

You can find some creative, colorful lights patterned after plants. This vibrant LED wall light makes a statement on a plain white wall. Not only are they a fun pop of color, but LEDs are also energy-efficient — it’s a green double-win.

Emphasize Natural Colors

What better way to bring the outside in than with a natural color palette? Greens, browns, and blues are staples in the interior design industry for a reason! But – any natural color palette works here. Snap some pictures of the world outside your door, or find a picture of your dream destination, and then head to a lighting showroom to find fixtures that match!

Natural colors with accents of dark blues and greens are a great way to create an outdoorsy feel. This black and gold pendant light creates a perfect balance of color in front of a forest green wall.

These pendant spheres are also a great example. The gold and cream lights are soft, neutral, and subtle, which lets the room’s natural wood textures shine.

Lampshades are also easy to find in natural colors. They add a beautiful, polished touch without being too busy or elaborate. This hanging lamp shade shows how beige can accent a room full of plants, wood, and other natural elements.

These are some classic, basic lamp designs. Next to other, more eccentric lamp styles, they might not be noticeable. Next to a deep blue wall, however, they stand out.

A green pendant lamp with a green wall and green furniture might seem like a lot, but it works. Having various shades of the same color adds a fun pop of personality.

Include Natural Materials

Your light fixtures don’t have to be synthetic and industrial just because they’re connected to the grid. Natural materials such as rattan have come back in a big way.

This cozy living room is filled with soft, natural materials. The wood lamp brings a natural warmth, and a bit of balanced structure, to this comfy space.

Some other popular materials include woven straw, wicker, or bamboo. This woven shade is a gorgeous shape and color. It also lets enough light through to illuminate all the other natural features of the room.

Woven shades are a great way to bring nature into your lighting. They illustrate that the size, shape, and color can vary based on the design of the room they’re going in. They can also be paired up to add another layer of design.

Ceramic is a beautiful natural material for a light fixture. These two domed ceramic pendants give off a warm glow that’s perfect for a cozy dinner.

—————–

Drawing inspiration from nature to decorate our homes isn’t a new idea. It’s lasted for centuries because it works – we love to bring the outside in! There’s no right or wrong way to make it work for you, so find something you love and get started!

If you’d like an extra hand finding just the right natural touch for your next lighting project, our lighting experts would love to help!. Give us a call, or stop by our showroom for the breath of fresh air that comes with a lighting update.

9 Ways to Upgrade Your Home with LEDs

by admin · Mar 8, 2023

With their excellent energy efficiency, affordable price tags, and numerous customized options, LED light bulbs are quickly becoming the top choice for home lighting. Available in small bulbs and flexible strips, these microchip-powered wonders fill almost every need in your home– including some you didn’t even know you had!

So get ready to upgrade your home’s functionality and style! Here are nine ways using LED bulbs in your home can improve your home’s design, costs, comfort, and safety.

1. Energy Efficient

LEDs are highly energy-efficient light sources because they create light with a microchip. With no gas or burning filament, they waste far less energy in heat production (not to mention much better customization in color, brightness, and temperature. But we’ll get to that later!)

Unlike older bulbs, LED bulb packaging uses lumens instead of watts to tell you how bright they are. Watts measured the electricity needed for incandescent bulbs to glow, but lumens directly measure the amount of light a bulb gives off. The higher the lumens, the brighter the bulb.

But it’s not just the packaging that’s changed– your utility bill will decrease when you replace incandescent bulbs with LEDs. They use far less energy than incandescent bulbs to give off the same level of light, savings you’ll actually be able to see.

2. Work with Most Light Fixtures

No matter your light fixture, there’s likely an LED bulb that’s a perfect match. LEDs come in a wide variety of standard-sized bulb sizes and shapes– so you can even use them in your candelabra chandelier!

The only thing to watch out for is ventilation. LEDs are cool bulbs compared to incandescent and other traditional options, but they’re not entirely immune to overheating. So if you’re ever in doubt, give a local lighting expert a call and they’ll help you find the correct bulb.

3. Safer than Other Bulbs

LED bulbs are one of the safest ways to light your home– they produce minimal heat and use very little energy. They’re even safer than fluorescent bulbs, a top competitor for energy-saving lighting. Compact fluorescent bulbs, or CFLs, glow by passing an electrical current through mercury gas. So CFLs are a little risky in “accident-prone homes,” like homes with pets or small children.

On the other hand, LEDs glow using a microchip. In fact, LEDs don’t even need to use the glass bulb case– they’d be just as safe and contained without it! So if you want to increase your home safety while still being energy efficient, swap out your CFLs for LEDs.

4. Best Color Rendering Index (CRI)

Did you know that the way you see color depends heavily on the type of light shining on it? Stores and online product photos use great lighting to show their products at their best potential. But if you bring those products home in poor lighting, you may be surprised to find that it doesn’t look as great as they did before. It’s not always buyer’s remorse, though– sometimes it’s just bad lighting!

LEDs are one of the best on the color rendering index (CRI), meaning they show colors more accurately. Their light will be very close to the lighting in-store or in the product images, so it’s much more likely to look the same in your home as it did in the cart.

As a bonus, high CRI lighting is a huge help in places like your bathroom or closet. Accurate lighting can help you pick the right clothes and do your best makeup. No more surprises when you see yourself in the office mirror!

5. Dimmable

Dimmable bulbs are perfect for rooms with multiple functions. Take your living room, for example– during the day, you’ll want bright light as you move about your daily activities and tasks. But in the evening, you want your living room to be a soft, cozy space where you can relax and unwind.

LEDs can come with dimmable capabilities, making them perfect solutions for bathrooms and bedrooms. They will also work with your existing dimmer switches and remotes. So simply swap out your old bulb, and you’re ready for a day-to-night lighting experience!

6. Vary in Temperature

A bulb’s light temperature refers to whether the light falls into cool (blue) or warm (red) light. Cool, blue light is in the same range as direct sunlight– it wakes you up and gets you focused. Warm light is similar to fire and candlelight and helps you to relax. Traditional bulbs were all warm light, but modern LEDs come in a wide variety of light temperatures.

How will knowing this improve your home, you ask? Our bodies work with a circadian rhythm– the natural cues to wake up with the sunrise and relax at sunset. But our modern life surrounds us with blue light well after sunset, eliminating the natural transition to red light before sleep. Choosing the right LED bulbs makes it easy to reintroduce the red light phase to your circadian rhythm.

Opt for warm light bulbs in places where you relax at the end of the day (dining room, living room, bedroom, etc.), and it’ll help signal to your brain that it’s time to go to bed– making it easier to fall asleep at bedtime. Just don’t undo your brain’s relaxation by staring at your phone screen in bed afterward!

7. Smart Integrations

What’s a smart home without smart lighting? LED bulbs are a top smart home choice because they offer a wide range of stress-free customization.

This flexibility makes them a great choice to use on their own, but they’re also great options to use with your smart home setup. Set routines for lights to turn on and off and control settings from your phone on the go!

You can even create a habit with your smart home assistant to ”warm up” the temperature of your LEDs a few hours before bed. It’s a simple change that could significantly help your family rest better– and avoid the increased risk of depression, anxiety, and weight gain connected to regular poor sleep.

Remember, not every LED bulb is “smart,” so make sure you read the packaging to get the perfect addition to your smart setup!

8. Customize Color

LED stands for “light emitting diode”– big words to describe a glow from passing electricity through a microchip. Because of the way they work, many LED bulbs can change color, temperature, and brightness with the press of a button.

Color customization may seem like a party trick with little functional use. And while they are a great novelty at parties, color-changing lights can also help you wind down at night and reduce eye strain when watching TV or sitting in front of a computer monitor.

LEDs are excellent for creating bias lighting for your TV or computer. Bias lighting casts light on the wall surrounding your screen to help decrease the intensity of the image, making it easier on your eyes. It also increases the contrast of your screen, so you’ll get a better view without upgrading your tech!

9. Strip Lighting

A lesser-known use for LED lights in the home is strip lights. If you’re looking to make your home look and feel like a bespoke model home, these are the way to go. The best part– they’re inexpensive and simple to install.

LED strip lights can be wired to a switch, but homeowners often opt for battery-powered or plug-in options for noninvasive installation. They typically come with either a remote or smart home integration capabilities. They’re also tiny, and since many come in a user-friendly peel-and-stick variety, they’ll fit just about anywhere!

We recommend trying out LED strip lights in places like:

Kitchen Cabinets: Stash these inconspicuously under cabinets to make dinner prep easier and safer, or add them inside glass-fronted cabinets to turn your dishes into art! You can also place them under the toe-kick to light those late-night snack runs.
Stairways: Make your evening bathroom trip safer by lining your stairs with light. Don’t want to see them? Try tucking them underneath the handrail!
Closets and Shelves: Want to turn your dark closet into an elegant dressing room? LED strip lighting will elevate your closet without any structural changes. Add them to the top of shelves, above your shoes, or around the top edges of your walls – they’ll go anywhere you need more light.
Bedroom Mood Lighting: String a few LEDs around your walls and change the color or brightness of your entire room without lifting a paintbrush– a very popular DIY for teenagers and social media creators
Bathroom GlowUp: Stash a few LEDs under bathroom cabinets for a toe-kick touch of luxury and soft lighting. Or use around your mirrors for true lighting during your daily skincare routine!

The Possibilities are Endless

LED bulbs and strips are small, easy to install, and can fit just about anywhere. Whether you’re swapping out all of your home’s bulbs or just adding custom lighting to your favorite spaces, LEDs can give you that luxury feel without breaking the bank. And when you factor in their energy efficiency, customization applications, health benefits, and smart home applications, it’s easy to see why LED bulbs are the swiss army knife for home lighting needs.

Proper lighting is essential to a fully functioning home– but it can be challenging to nail the balance between light levels, fixture designs, and a budget! For your next project, contact the experts at Galleria Lighting.

How to Safely Replace A Ceiling Light

by admin · Mar 8, 2023

Ceiling lights are a must-have feature in any room. Whether you don’t like the previous homeowner’s taste or you’re just ready for an update, ceiling lights can revitalize your home space. It may be even easier than you think–just follow these steps to safely switch out those old light fixtures for a new look.

What you’ll need:

Screwdriver
Step ladder
Voltage detector

You may also need:

Wire cutters
Wire strippers
Pliers
Painter’s tape
An extra set of hands

Part 1: Remove Old Fixture

Step 1: Turn off power

Shutting off the electricity is important to your safety. Locate the switchboard for the room you are working in and flip the switch. If you’re not sure where the switchboard is, check the basement or garage. It might also be in the front of the house or near the entrance.

Once you’ve flipped the switch for the room with the ceiling light, go back into the room and flip the switch a few times to make sure the power is off. Then, leave the light switch in the off position. Make sure you lock the circuit box or leave a note indicating that you are working.

Step 2: Remove cover and bulbs

Use a stable step ladder to reach your ceiling light. Hold the cover, or the visible, outside piece of the light fixture, in place with one hand. Loosen the screws with a screwdriver in the other. (For heavy or large fixtures, it’s best to have someone else hold on while you work on the screws.

Once the cover is removed, unscrew the light bulbs and set them aside.

Step 3: Lower the fixture base

With the cover removed, you will be able to see the base–the part of the light fixture that attaches directly to the ceiling. Typically, the base will have tabs or nuts and screws securing it. Loosen the nuts or screws, then lower the base to access the wiring (In the rare case you’re unable to find the screws, search for the installation manual online. You can also take a picture of your base and bring it into our showroom – we’ll take a look and help you figure it out!)

Until you have disconnected the wiring, you will want to lower the base but not remove it completely—an easy way to do this is by securing it with painter’s tape or having someone else hold it in place.

Step 4: Disconnect the wires

Once you have uncovered the space behind the old light fixture, there should be a junction box where wires are connected and stored. Start by removing the caps or tape covering the wire connections. The caps will come off when twisted counterclockwise.

Pro Tip: Take a picture beforehand so you can remember exactly how everything was put together.

Part 2: Connect the Wiring

Step 1: Test voltage

Test each exposed wire by touching it with the tip of your voltage detector.

If the voltage detector lights up, there is a current running through, and the wire is unsafe to touch. Double-check your circuit box and ensure the switch is still flipped.

Once you’re sure there is no electrical current, you are safe to continue working with the wires.

Untangle the wires and detach the fixture from the ceiling completely. Either hand off to someone below or carefully carry it down the ladder.

Step 2: Check wires

Frayed wires can be hazardous -if there is any fraying on the end of the wires, trim them down with wire cutters. Then, strip off any insulation on the outside with wire strippers. You only need to strip about ½ inch of insulation for the wire connection.

Pro Tip: Check your new fixture’s installation recommendations carefully. If you’re installing a heavy fixture such as a ceiling fan or chandelier, you may also need to install an additional support in the ceiling.

Step 3: Match and Attach

Electrical wires are color-coded. Black or red are hot wires, white is neutral, and green or bare copper are ground wires. A grounding wire sometimes connects to a grounding screw instead of another wire. Look for a matching wire in your ceiling for each wire in your fixture.

Twist together each matching wire. Either by hand or with pliers, hold the exposed ends side by side with one hand and twist with the other. (This is where your picture of the original fixture’s wiring comes in handy.)

Now that the wires are connected, it’s important to cover the exposed ends again. Screw the wire caps on by twisting clockwise over the connected ends until they hold the wires tightly in place. If your original fixture didn’t have wire caps, you can use electrical tape as well.

Make sure to check the owner’s manual for specific instructions—for example, you might have an extra red wire that connects to a black wire. If you don’t have any instructions, generally you will be fine with just matching the correct wire colors.

Part 3: Install New Fixture

Step 1: Replace junction box

With all your wiring safe and sound, the junction box is ready to be put back into place. Tighten the screws securely against the bracket until Fold the wires up into the box so they will be hidden behind the ceiling light.

Step 2: Attach new fixture

There are several different ways your new light fixture base could attach to the ceiling—these are the most common ways. As always, check the owner’s manual for anything specific or unique about your light.

Securely attach the light base by positioning it over the mounting screws. Place a metal nut on each screw and twist by hand until they are tightly holding the base in place.

If the fixture has a mounting bracket, connect the mounting bracket to the junction box first, then hang the base over the screws.

If it’s a keyhole shape, adjust the base so the screws slide into the smaller grooves and then tighten the screws with a screwdriver until they are holding the base securely.

Step 3: Install light bulbs

Now that your base is set, it’s time to add the light bulbs. Make sure you have the correct wattage—the fixture typically indicates its maximum wattage on the package or owner’s manual.

When choosing which bulbs to use, the lower the wattage the safer. Most light fixtures are safe with up to 60 watt incandescent bulbs. You may also want to consider more eco-friendly choices, such as CFL or LED bulbs. These options have lower wattage but produce the same amount of lighting, saving you money on electricity in the long run.

Test the bulbs by turning the electricity back on—flip the switch on the circuit breaker then turn on the room light switch. If it is flickering, dim, or not turning on at all, turn the electricity off again and check everything—look for loose connections or mismatched wires. If your lights are bright and solid, you are ready for the final step.

Step 5: Attach cover

Flip the light switch and circuit breaker back off before installing anything else. Take your light fixture’s shade, cover, or top and climb back up the ladder. Attach it to the base by twisting screws or attaching pieces until everything is tight and secure. If it’s a hanging light, make sure it’s at the proper height before finishing your work. Every light has different connecting components, so check your owner’s manual and just make sure it’s snug.

And there you have it, your guide for installing a new, updated ceiling light. Now that you know how to install it, make sure to visit our showroom to choose the perfect fixture for your ceiling!

How to Safely Install a Ceiling Fan

by admin · Mar 8, 2023

Installing a new ceiling fan is a cheap way to save on energy costs all year without compromising on comfort. In the summer, ceiling fans cool down the house by creating a breeze. In the winter, they help circulate the heated air to warm the whole room evenly.

Putting in a ceiling fan is a win-win for your comfort levels and your budget – and it’s a pretty simple DIY project for homeowners. Plan on giving yourself a few hours (depending on the type of fan and your experience level with lighting DIYs), and grab a friend that can help you hold things in place while you work.

If you’re buying a ceiling fan new, it should come with thorough installation instructions. We always recommend following those instructions exactly to be sure that your fan is installed safely and properly. If you’re installing a secondhand fan, you may be able to find the installation guide online by searching with the model number on the fan. Either way, we’ll walk you through the basic steps here so that you can prepare.

1. Preparation

Before you break out your tool belt, make sure you have a good plan in place. There’s nothing worse than being in the middle of a project and realizing you don’t have everything you need to complete the task.

Tool Checklist

Before you take on a ceiling fan installation project, make sure you have all the tools you need so you don’t have to rush off to your local hardware store for a last-minute purchase. To install a ceiling fan you’ll need to have a:

Voltage Tester
Ladder
Measuring Tape
Screwdriver
Ceiling Fan-Rated Junction Box
Fan Brace
Wire-Cutter/Stripper
Light Bulbs
Globes/Shades if they aren’t included
An extra-long downrod if you’re installing on a sloped ceiling
Ceiling Fan and Kit

Choosing the Right Fan Size

Measure the room you’re working in before you start. Not all fans are created equal, so pick one that will fit. Use the following guidelines to help.

For rooms smaller than 75 square feet (like bathrooms), pick a fan with blade spans of less than 36 inches.
Blade spans between 36 and 42 inches are ideal for rooms up to 144 square feet.
A 44-inch span is perfect for rooms up to 225 square feet, like a dining room.
For rooms that are 225 square feet or larger (a large living room, for example), you’ll need a fan with a 50 to 54-inch blade span.
The more space between the ceiling and the fan, the better! The ideal ceiling fan height is 8-9 feet above the ground.
If your ceiling is less than 8 feet, you’ll most likely need to install a flush-mount fan (no downrod).
High pitched ceilings typically require you to buy an extra-long downrod (so that the blades won’t hit the sloped ceiling), so check your ceiling height and angle before choosing your downrod.

Pro Tip: Once your fan is installed, the tips of the blades should be at least 30 inches from the walls, and the bottom edges of the blades should be at least 7 feet above the floor.

Other Important Tips

Ceiling fans are heavy! They need to be anchored properly to an electric ceiling box designed to hold the weight of the fan. Inspect the electrical box to ensure it’s fan-rated. There should be an inscription on the box to indicate this. If it’s not, you’ll also need to purchase a fan box before you get started.
Check to make sure the light switch you’re using is wired appropriately for the fan. If it isn’t, you may need to call a professional to get the job done.
Check the ceiling joists for any wiring or plumbing pipes that may be in the way.
If you’re adding a new fan where one didn’t exist, check local building codes to determine if you need a permit.
Always check your installation guide for any additional requirements that are specific to your fan. For some expert help choosing the perfect fan for your space, give us a visit or a call and we’d be happy to help.

2. Safety

Now that you’re ready to begin, head out to your circuit breaker and turn the power off for the room where you’ll be installing your fan. Also, make sure all of the wall switches in the room are safely in the “off” position. Do not rely on a wall switch alone to protect you from electrical shock! Always use a voltage tester to be sure the power is off before handling wires.

Pro Tip: Place some electrical tape over the switches you’ve turned off on the circuit breaker. This will prevent anyone from switching it back on while you’re working.

3. Remove Your Old Fixture

Let’s get started! First, you’ll need to take down the existing fixture. Most fixtures have easy-to-find attachment points, like screws or twist-off caps. Remove accessories like light bulbs, shades to get down to the base of your fixture, then unscrew the base from the ceiling.

If you’re removing an existing ceiling fan, remove the light bulbs and globes first. Then, take down the light kit (if needed – some fans have them, some don’t). Unscrew and remove the fan blades next. At this point, you may need to enlist a helper as the full weight of the fan base and motor can be heavy. Pull off the canopy (metal cover at the base of the fan). The last step is to remove the mounting bracket with a screwdriver!

Once you have the base of your fixture dropped away from the ceiling, unscrew the wire nuts connecting it to the electrical box. Be sure to test the wires with your voltage tester first!

4. Install a Fan Box

Before you start, check your existing electrical box. If it isn’t rated to support the weight of your fan, you’ll need to install a new one. To see if your existing box is rated to hold a fan, just take a look at the label! If you can’t find a label, err on the side of caution and get a new one.

You’ll have to do a little bit of homework here to figure out what will work best for your project. Fan boxes are easiest to install if you have open access, like in the attic or an unfinished ceiling. If you won’t have easy access you may need to widen your drywall hole a little, but you can usually find a brace that will slip through the existing hole.

Take a look at your rafters to determine the best way to install your fan box. Fan boxes can be attached directly to the rafter with a side bracket. If your new fan won’t be right next to a rafter, look for a brace that will span the space between two rafters. These braces can be a little trickier to install through a small hole in the ceiling, but they’ll give you a lot more breathing room when it comes to getting your fan box in the right place.

5. Install the Mounting Bracket

To secure the mounting bracket to the fan box, start by threading the wires through the mounting bracket. If the fan has a slide-on bracket, leave the bolts on the junction box, slide the bracket over the mounting hardware, and tighten the screws. For fans without a slide-on bracket, place the bracket over the mounting bolts that poke through the bracket. Then, secure it using the provided nuts. If your fan is a flush mount, pull the wiring through the canopy (the part that covers the wiring/mount bracket) and skip to step 7.

6. Install the Downrod

To set the downrod, you’ll want to find a flat work surface. Slip the canopy onto the downrod and pull the primary wires through the hollow downrod. Then, connect the downrod to the fan base. With the downrod and base assembled, attach the other end of the downrod to the mounting bracket.

7. Wire the Fan

Next, it’s time to wire! Hang the downrod – or canopy, if you’re installing a flush mount fan – on the hook on the mounting bracket. If there isn’t a good place to hang it, phone a friend to hold the fan up for you to free up your hands while you connect the wires.

Before you start, check to make sure all your wiring (and the wire nuts) will fit in the ceiling. Use your wire cutters to trim down any wires that won’t. This will also keep them from vibrating against the canopy when the fan is on. Use wire strippers to expose the copper of the wires on the new ends.

Connect the corresponding wires using the provided wire nuts. Your installation guide will have a diagram to follow, but, generally speaking, the fan’s green wire connects to the ground wire, the fan’s black motor wire connects to the black supply wire, and the fan’s white wire connects to the white (or neutral) supply wire.

Double-check your work against the diagram, then gently push the wires into the junction box. Lift the fan into position, then clip it to the mounting bracket and secure the screws.

Pro Tip: Some fans come with additional wires for extra features, like having a separate switch for the light and fan. If your switches or wires don’t match the diagram, you might need to check in with an electrician or a lighting specialist at our showroom to help you get things set up correctly.

8. Blades and Bulbs

Now it’s time to install the fan blades. Every fan is a little bit different – but most fans will have an arm or bracket that you’ll need to attach to the blade and then to the base using a screwdriver. Some fans have quick-install blades that speed up the process using keyhole slots that slip over the fan’s mounting screws and lock into place with a little tug.

Some fans have reversible blades – so make sure you’re checking each time that you have the correct side pointed down!

By now, you should be seeing the light at the end of the tunnel – so let’s install the bulbs! For fans with a light kit, refer to your guide to ensure everything goes in place correctly. Generally, you’ll just need to install the shades, globes, or light cover. If your fan did not come with bulbs, make sure the bulbs you install have the correct base type and wattage

If your fan came with a remote, don’t forget to install the remote control holder!

9. Lights… Fan… Action!

Last, but not least, it’s time to test out your new ceiling fan! Go back to your circuit breaker and turn the power back on. Try switching your fan and lights on and off using the light switch or remote control. Test all of the speed settings to make sure your fan is secured properly and doesn’t wobble or rattle.

Most of the time, installing a ceiling fan is a pretty straightforward DIY project. Occasionally, an odd issue can crop up due to things like old wiring. If you run into any trouble, be sure to give us a call right away, or call an electrician that can help you troubleshoot the issue.

—

Congratulations DIY master! Now that you’ve successfully installed your new ceiling fan, get ready for a fresh breeze to blow your way–and some savings too. With all that extra cash blowing around, come visit us and we’ll help get you started on your next project.

—————————-

DISCLAIMER: Be sure to follow all the manufacturer’s installation instructions and take all recommended safety precautions. Check before installing to see if you need a permit and be sure all building and electrical codes are observed. If you have any questions or are unsure about installing the fan yourself, contact a licensed electrician or Galleria Lighting for more help.

2023 Interior Design Trend: Creating a Cozy House that Feels Like Home

by admin · Mar 6, 2023

It’s 2023 and this is your wake-up call! Your home needs you – it’s ready for a refresh! This year, we’re all looking for a respite from the stress that always seems to work its way in. Designing a comfortable home will make you feel the extra happiness and productivity you’ve been in desperate need of. These 3 expert tips will make your home a haven you’ll be itching to get back to at the end of the day!

1. Choose a Soft Color Palette

It’s no secret that colors have a huge effect on your mood and the feel of a room. These rooms knock the color palette out of the park without sacrificing personal style or comfort. Achieving a soft color palette doesn’t have to be difficult – go with neutrals, a pop of color, or choose a monochromatic color scheme and you’re set!

Neutrals

A neutral color palette seems like an obvious choice when you’re going for comfort, but it can be tough to pull off – without color, other elements like texture or shapes will have to do the heavy lifting.

The heavyweight champions here are definitely the plants! Adding some green to an otherwise neutral-heavy space brings some life and vibrance without destroying the tranquility you desperately need. Finishing this look with a variety of textures and shapes from the hard wood edges to the pair of round tables to the woven area rug makes this space feel comfortable, creative, and cozy.

This neutral bedroom incorporates beige and white with black accents to ground the space. The night stands with pendants hanging above elevate the space, giving you lighting and a gorgeous focal point! We love how this space feels lived-in without looking cluttery. With neutral tones, the soft textures of the rug and blankets are what make this room feel comfortable and cozy.

Picking a neutral color palette for this sitting area really make the shapes shine. We love how arches are carried throughout the design from the furniture to the architecture. This chair looks like a cloud and with the gorgeous light above it, anyone sitting here would feel like they’re in the heavens!

Pop of Color

A cozy home doesn’t have to be colorless! If neutrals don’t speak to you, try mixing them with a pop of color. It’ll give your room some excitement, but not so much that it’ll feel busy or chaotic.

This living room took a bold color and ran with it. The navy blue is a stunning contrast to this cozy tan leather couch. If we could copy and paste this look into our homes, we would! The neutrals pop against the accent wall and we couldn’t be more obsessed.

These red velvet pillows and drapes contrast with the neutral room and bring in some cozy texture. The bright colors spice up what might otherwise feel like a bland living room.

Monochromatic

Choosing a monochromatic color scheme is a 2023 trend we love. It’s bold, but still soft. In a true monochromatic space, there isn’t extra visual stimuli for your brain to process. This gives your brain a sense of peace and calm you may not feel in a room with more going on in terms of color. These rooms use a simple color palette and the effect is cozy with a touch of elegance.

Green is one of the most soothing colors. It can bring a sense of peace and harmony to your home. This couch and wall combo is no exception! Choosing to pair them with beautiful browns makes this sitting room look like it was plucked straight from nature, then given a facelift.

This kitchen uses the monochromatic color scheme to make it look bigger than it is. We especially love that extra wood cabinet with accent lighting both for functionality to store more and for decorative purposes. The calming blues make this a space you’d want to do some stress-baking in!

2. Add Soft Textures

Texture is a vital tool in an expert’s tool belt, especially when comfort is your end-goal. A space can be gorgeous, but if it feels like a place your grandma will yell at you for touching anything in, it won’t really feel comfortable. Texture is what takes a space from formal and austere to a beautiful, cozy space you can actually live in.

There’s no question this bedroom is gorgeous, but it also feels like a space you could spend time in without completely messing it up. The intentionally unkempt linens on this corner of the bed add simulated texture that makes it feel like home. We also love the green velvet accent pillow and floor pillows for an extra cozy touch! A lamp and pendant allows you to have dimmer or brighter lighting to accommodate your changing needs.

There is no world where a chunky-knit blanket and lots of pillows won’t scream comfort. The touches of fur on the rug and the side bench give it an extra dose of coziness. Anyone would love to curl up and hibernate here all winter! Light a few candles in the lanterns and switch on the pendant for the perfect reading spot at night.

This feminine bedroom is a corner of paradise! The colors are soft and gorgeous, but the textures are what really make this space magical. The velvet headboard brings delicate softness to the space. The textured pouf and cane-detailed night stand here are working overtime – and they should get paid for it! They bring elements of texture and give some seating and storage space. The blanket and soft rug are the finishing touches that would have anyone making excuses to retreat here for peace and quiet.

3. Soften Your Lighting

Harsh lighting is the opposite of comfortable! It’ll leave you with a headache and can actually make it harder for you to sleep at night. To bring in some much-needed comfort, you’ll need to soften up your lighting. In a room with soft lighting, the transition from light to dark is gradual and easy on the eyes. Avoid harsh shadows and balance your lights out using these three tips and your eyes and mood will thank you!

Dimmable Lighting

Switching to dimmable lights is a relatively simple way to soften your lights and make your lighting customizable. This cozy room is the perfect place to recharge your batteries. Dim the lights 2 hours before bed to help yourself sleep better, then brighten them in the morning to jump start your mood and your day!

Layer Your Lights

Layering your lighting is a fool-proof way to give you adjustable light. Every room in your house should have at least a few light sources to make it feel more comfortable and eliminate any dark corners. Adding a few lamps across a room and some pendants will give you flexibility to have more or less light depending on your need and mood.

Accent Lighting

Accent lights are the finishing touches that make a room feel complete. They’re the piping on top of the icing on the cake! Adding them makes a room instantly feel warmer and more comfortable. Plus, they soften up your lighting by eliminating harsh shadows in areas that might otherwise go overlooked. Put sconces on an empty wall, strip lighting under cabinets like in this kitchen, or pendants above conversation areas. A room with warm, balanced lighting is a guaranteed ticket to having the relaxing ambiance you need for comfort.

—

Listen, it’s 2023 and it’s time you started living your life in comfort! Choosing to design a cozy home is about more than just aesthetics. It’s about overall wellness! You deserve to live in a home you love, so it’s time to get started. With a little inspiration, the expert tips above, and help from Galleria Lighting you’ll be set! Give us a call and we’ll help you soften your lighting and give your home the extra relaxing boost it needs.

Decorating a Gorgeous Entryway – 5 Insider Tips You’ll Have to Steal

by admin · Mar 5, 2023

A front entryway can say a lot about a home! When guests walks in, they know what to expect by the mood you create. Is it elegant or casual? Is there a spot for them to put their shoes and coats, or do they leave them on? Is it well-lit or is there a moody ambiance? No matter the mood you choose, make sure you’re intentional about it!

With a few tips and some inspiration from us, your entryway can say classy, comfortable, modern, or fashionable. They say not to judge a book by its cover, but if we were allowed to judge houses by their entryways, the rest of the rooms would be sure to deliver on beautiful design.

1. Rethink Your Furniture

One of the trickiest parts of styling a front entry is using the space effectively. If you have a roomy entryway, you may have room for a lot of furniture. With a smaller entryway or hall, however, you’ll have to be careful what pieces you choose to include – each one will count!

Benches

A bench is an entryway staple! It provides you and your guests with a spot to sit down while putting on shoes and can even offer storage (depending on what you get). These benches are just as pretty as they are practical.

This furniture has a small footprint that would fit even the smallest space! Since the bench doesn’t have built-in storage, there’s a basket for storing shoes or other outdoor accessories. The matching coat rack is functional and space-saving. Throw in a circular mirror for a quick hair check before you walk out the door, and you’re done!

This entryway couldn’t be any cozier! Adding a soft pillow and a blanket to a seating area is a simple trick to make any space feel homey. The only things we’d add are some hooks above the bench for coats and a spot for the shoes that are guaranteed to end up everywhere.

Entry Table

After adding a bench, next on our priority list is definitely an entry table. They can give you extra storage, show off your style, and are a great place for some accent lighting.

This entry table will fit in any space and the baskets give you some storage for your kids’ mess of winter accessories! Adding a couple of lamps on top is always a smart choice, too. They’ll light up your decorations and make them a focal point. The coordinating runner and artwork in this entryway are worth highlighting!

We love the clean lines and neutral-toned wood of this table. The decor is amazing and there’s tons of storage! Neutral books, a vase, a lamp, and a couple of knick-knacks are proportionally perfect.

This entryway is dripping in originality. Instead of using a traditional table, this homeowner chose a small dresser – genius! When you have less space to work with, every piece of furniture matters. Choosing a dresser with drawers ensures you have a place to toss any mess without going to any extra effort.

Built-In Furniture

If you’re looking for a storage solution that’ll contain any mess, creating a mud room-style entryway with built-in furniture will give you more storage than you’ll know what to do with!

When you’re coming back from a long day, the last thing you want to do is take a trip all the way to your room to put away your things. Instead, create a one-stop shop for your everyday items. Hooks can hold backpacks, purses, hats, and jackets. Shoes can be stored under the bench and anything else can go in the baskets above.

Built-in furniture doesn’t have to take up tons of space to be effective! This entryway has all the room you need for storing your essentials. This modern entryway is gorgeous, but we’re obviously giving our gold medal to the stunning light fixture that completes the look.

2. Update or Add Lighting

Speaking of lighting, no entryway is complete without it! From chandeliers to lamps, we have all the styling tips you’ll need to make your entry shine.

Chandeliers

A big entryway with high ceilings calls for a chandelier – the space will feel empty without it. This chandelier will wow your guests from the moment they walk in the door!

This entryway’s door coordinates perfectly with the chandelier they hung! Because the door and chandelier have such warm tones, the gray and brown hexagonal tile was a great choice to cool off the look, while still tying in the warmth. The huge mirror on the wall is also a smart choice because it’ll reflect light, giving this homeowner the most possible lighting for their dollar.

Your entryway doesn’t have to be 16 feet tall to hang a chandelier! This front room’s fixture makes the space ornate and delicate – like something out of a Jane Austen book. Chandeliers can make a statement in any space – just be sure to hang them properly so you don’t run into them!

Chandeliers make any space feel luxurious, but there’s something especially stunning about the way this one hangs over a baby grand piano. You can picture a family gathered around the piano singing carols on Christmas Eve with chandelier’s light twinkling on them – pure magic!

Lamps

A floor lamp is a great way to add dimension and height to your design. This one provides focused lighting for putting on your shoes and coat before you rush out the door. We also love the organization of the shelves in this entry.

Lighting doesn’t have to be complicated! Adding a basic table lamp is a low-effort way to make a big difference in your design. It flows seamlessly with the other tabletop knick-knacks, but it’s also practical.

Sconces

The indoor sconces in this entryway are a smart solution for lighting that won’t take up loads of extra room. This homeowner even added a mirror that will reflect some of that gorgeous light!

This creative entryway’s sconce is modern, chic, and well-placed. Accent lighting is key to making your life easier. No more fumbling around in the dark to tie your shoes or buckle the strap on your heels!

3. Get a Rug

A rug is an anchor for furniture that would otherwise float! Since the entryway is a heavily-trafficked area, a rug can also help protect your floors. They’re easily replaced while flooring is, well…not.

This brown rug makes this home’s entry area feel cohesive. Without it, the room would feel more like a collection of random furniture! Its neutral color makes it a great piece to keep around even if you switch out furniture.

This jute rug brings warmth and texture to a room otherwise lacking both! It also adds a flair of bohemian that we’re loving.

4. Hang a Mirror

Mirrors are one of our favorite design hacks. They reflect light, make a space look bigger, and are perfect for entryways.

You can’t go wrong with a big round mirror! The black finish on this ties in with the basket and pillow nicely. It’s a piece you won’t regret buying.

This pretty floor-length mirror is in the ideal place for a last-minute outfit check! Do those shoes really work with your outfit the way you thought they would? A quick glance in this mirror and you’re set to go.

A check-the-outfit station is a must-have in an entryway. This arched floor-length mirror is also perfectly placed to reflect natural light from the window and light from this cute pendant.

A classic circular mirror is also a great last-minute stop to make sure there isn’t any breakfast in your teeth! We also love the creativity of the shelving unit here.

5. Get Creative

Possibly the most important tip we can give is to be creative! Every space is a little different so there isn’t a one-size-fits-all when it comes to designing an entryway. These spaces radiate creativity and may give you a few ideas for decorating yours.

When your real estate is less of an estate and more of an apartment, you have to use every inch wisely! The bench and hook shelf combo serves the function of a hallway tree, but is a bit smaller and could be partially DIY-ed to save money. To get even more creative, this homeowner could replace the clock with a mirror and a floor lamp for more dimension and lighting.

This adorable entry uses a garment rack to store shoes and coats. Practical, but still pretty especially if you don’t have a coat closet. The wood tones match the bench and frames and the plants bring in some life!

Creativity and boldness go hand-in-hand. If you’re feeling brave, ditch the neutrals and pick a bright color palette that’ll attract some attention. Go bold, go home, or pick door number 3 and go bold at home!

This space is about as creative as it gets! A sideways ladder-like coat rack looks like something a handy homeowner could DIY. This bench looks like it was also DIY-ed – maybe out of old shutters? Whatever it is, it’s a crafty way to give you a bench with storage underneath.

We’ve got one word for this picture: mood. Instead of picking light and bright colors, try out a richer, moodier color. Nothing will take your entryway to luxury faster than picking a darker color palette! We love the contrast of the gold lamp and sunburst mirror against the gray in this one.

Another clever way to create an entryway is to dedicate a corner in your front room as your entry zone. Putting a rug down makes it feel like a cohesive space, then adding an entry table and bench seals the deal. This space also has some built-in shelves we’re obsessing over! They add a trendy touch and the decorations can be switched out whenever you get bored.

—

When you’re ready to get started decorating your entryway, we’re here to help. Come visit Galleria Lighting for some more expert advice! With our help and these 5 tips, you’ll have a front entry everyone will envy!

« Previous Page